Wedi Fundo Sealing Set - FSS

The wedi Fundo Sealing Set is a complete set for sealing joints in wet room areas and the perimeter of wedi shower trays This set is sufficient for approximately 10 metres of sealing joints and 2 internal corners

wedi Fundo Sealing Set is a specially adapted installation set for wedi Fundo floor elements.

The wedi Fundo installation set consists of a 2 component slurry sealants and wedi tool sealing tape/sealing internal corners.

The Fundo Sealant Set is is sufficient in quantity to install a Fundo floor base and a wedi building boards wall partition and ensure water resistance of the joins if installed following the installation instructions.

wedi Fundo Installation Kit Technical Details

• Powder Component: Special Cement Mortar With Selected Additives
• Liquid Component: Modified Acrylate Dispersion
• Maturing Time: Approx 3 minutes
• Processing Time: Approx 1 to 1.5 hours ( At 20° C /50% Rel. Humidity*)
• Substructure Temperature: From +5°C to +30°C 
• Resilience: Can Be Applied With Ceramic After Roughly 24 Hours 

*Please note higher temperatures and humidity will reduce the specified times and lower temperatures will extend them. 

wedi Fundo Sealing Set Contents 

• 1 x Waterproof Sealing Tape
• 1 x Powder Component (2.5Kg)
• 1 x Liquid Component (0.8L)
• 2 x Waterproof Internal Corners