Call: 01642 913727
Monday-Saturday: 9am - 5pm
Call : 01642 913727 Monday-Saturday: 9am - 5pm
Close My Cart 0
Sub Total 0 £0.00
Close My Cart 0
Sub Total 0 £0.00
Menu
Shower Wall

Showerwall HPL Panel Internal Corner Profile

Our Price £20.00 inc. VAT
Price £25.92 inc. VAT
Code: Showerwall Internal Corner
Finish:
You Save £5.92 23%
Qty
Usually Next Working Day Delivery
Description

Showerwall Panel Internal Corner - 2450mm

This fixing bracket from Showerwall is designed to fix Showerwall panels flush into corners, this sits flush against the corner of the wall surface and the panels slot into each side at 90° angle, the Showerwall panels are held in place with adhesive leaving a good looking finish.

  • 90 Deg Internal Corner Trim
  • Used to mount panels at right angles to each other. Seal with Showerwall sealant.

In order to ensure a watertight finish, profiles/trims are required for the outer edges of the panels as well as both internal and external corners. Five trims are available here dependant on where you would like to fit our panels.

All trims measure in at 2450mm in length and should be sealed using Showerwall sealant.

Showerwall Trims Available In:

  • Bright Silver
  • Satin Silver
  • Gloss White
  • Black Silk
  • Antique Gold*

*Quadrant trims are not available in this colour

Please note: This profile/trim is only suitable for Showerwall HPL panels and not the Showerwall Acrylic or Showerwall Acrylic Custom Collection. Trims are not required for Acrylic and Custom panels.

Shipping: Can ship only within Mainland United Kingdom
Specification
Product Details
Type
Panel Accessories
Collection
Showerwall Laminate
Delivery Information

PLEASE NOTE: Showerwall deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews

Showerwall HPL Panel Internal Corner Profile

Showerwall HPL Panel Internal Corner Profile
Product isn't rated yet.
x
Write a review

Validation Code

Thank you for subscribing to the
Rubberduckbathrooms newsletter!