Mermaid Acrylic Wall Panel Adhesive

For use with Mermaid Acrylic Panels only.

Mermaid's acrylic adhesive is a high-grab, neutral curing adhesive designed for the Mermaid Acrylic wall panel range. It's a solvent-free adhesive which remove any risk of the adhesive reacting with the boards during installation. Only a Neutral Cure Clear adhesive can be used when installing mermaid acrylic boards.

Directions for Use:

To help with pattern matching and to reduce risk of the adhesive curing during the installation phase, dry fitting of the boards should always be carried out prior to applying any adhesive.

Once you're happy the boards are orientated in the right way and any necessary sections cut out. Apply the adhesive in a minimum of 7mm diameter beads in vertical lines 100mm apart to the wall surface. Ensure that beads are applied around any section that needs to be cut out. 

Remove the clear protective film from the back of the panel to expose the painted surface before bonding to the wall. Apply the panel to the wall within 30 minutes of adhesive application. To help create a uniform finish, apply even pressure to the surface of the board while bonding to the wall. Make sure not to scratch or damage the surface of the panel whilst fitting.

Full instructions can be found using the link below;

Mermaid Acrylic Panel Installation Guide