Mermaid Acrylic Wall Panel Sealant

For use with Mermaid Acrylic Panels only.

Mermaid's acrylic Sealant is a quality Silicone based Sealant designed for use with the Mermaid Acrylic wall panel range when creating a seal around the panel edge and trims.

Directions for Use:

To help with pattern matching, dry fitting of the boards should always be carried out prior adhering and sealing the boards.

Preparing the panels with masking tape before sealing can save a lot of time cleaning off excess sealant later on in the installation, especially at the bottom joints where a larger coved seal will be formed.

A 3mm - 4mm gap must be left between the bottom of the panel and top of the shower tray or bath, this can be achieved by using packers when fixing panels. The gaps should then be sealed ensuring that the silicone is forced into the void.

A clearance gap of 2-3mm all around should be allowed where pipes or fittings come through the panel even where collars are to be fitted. The gap should then be filled with sealant

Full instructions can be foung using the link below;

Mermaid Acrylic Panel Installation Guide