15mm Stainlesss Steel Retro-Fit Corner Protector - Genesis

Silver Finished stainless steel Edge Protector

• Length: 2.5m
• Width: 15mm

Genesis edge protection profiles have been designed for protection of both new and already damaged walls and maybe a suitable alternative to replacing the wall covering if minor damage has occurred to the external corner.

Suitable for retro fixing the profiles provide a decorative and clean finish as well as suitable protection.

Genesis edge protection profiles are designed to absorb and protect against impact damage on external corners on walls. Suitable for retro fixing the profiles provide a decorative and clean finish as well as covering existing damage to walls so the wall covering doesn't have to be replaced.

Installation Instructions

1. Ensure that the surface where the EAS profile is being applied is smooth, dry and free from any contaminants such as loose paint, dust and grease. 
2. Apply a bead of sealant adhesive to the back of both wings on the inside of the profile. 
3. Carefully place the EAS profile into position and apply even pressure over the entire surface of the profile until a satisfactory lie is achieved. 
4. Once the adhesive has set, remove the protective film from the surface of the profile.