Elements Level Access Linear Uno Wet Room Tray Kit 1400 x 900 x 30mm End Drain - Anthracite

Installing a wet room tray has never been easier than with the Linear Uno Tray Kits from the Abacus Elements collection.

Using an expertly designed single fall, the tray surface is subtly sloped to direct water toward the Linear Uno end drain, so tiling is simpler and no envelope cuts are needed. The tray can be installed flush with the floor, creating a seamless, step-free wetroom experience.

This kit comes with all the components you need to install your tray: Linear Uno waste, tile trim, waterproofing materials (tape, internal corners), Pro-Seal premix, primer, tile guide, and more.

EMUT-EN86-1409 Linear Uno Wetroom Kit Includes:

• 1 x 1400 x 900 x 30mm Level Access Shower Base & Linear Uno Anthracite Waste
• 1 x Complete Tray Installation & Drainage Kit

Linear Uno Wetroom Tray Specs:

• Level Access Wetroom Tray Former
• Single Fall Tray - No Envelope Cuts Required
• Depth: 900mm
• Width: 1400mm
• Tray Height: 30mm
• Suitable For 9-10mm Tiles Only
• Linear Uno Drain Cover

The Installation & Drainage Kit Includes:

• Pro-Seal Premix
• Wooden Floor Primer
• Horizontal & Vertical Shower Waste
• Waterproof Tape
• Waterproof Internal Corners
• Tile Guide
• Paint Brush
• Notched Trowel

The shower tray is 30mm high and is typically recessed into timber floors. The drain must be able to sit between the joists or in a channel on a screeded floor.

Constructed from a high quality structural hard foam, the Level Access Wet Room Shower Floor is humidity resistant and has a special mortar coating with a glassfibre reinforcement. It is light, strong and an ideal substrate to tile on to.

NB: We recommend the use of 10mm Elements board on the rest of the floor prior to tiling. This is for waterproofing stability of tiles and insulation.