Elements Level Access Wetroom Tray Linear End Drain Kit 1400 x 900 x 30mm EMK6-EN-1409

Making a wetroom is easy with the Elemenets range of wet rooms kits by Abacus. This level access wetroom kit gives a level flat floor (with a slight slope to allow water to run to the waste) with no step, perfect for easy access.

This kit is supplied with a stainless steel waste cover plate as standard and features an optional 600mm tileable linear waste, if you're looking to match the tiles around the waste.

EMK6-EN-1409 Wetroom Kit Consisting of :

• 1400 x 900 x 30mm Level Access Shower Base
• 600mm Linear End Waste
• Complete Tray Installation & Drainage Kit

The Installation & Drainage Kit Includes

• Pro-seal premix 0.5L
• Wood Floor Sealer
• Horizontal Shower Waste
• Linear Stainless Steel Cover Plate
• Fix-KST 5kg bag
• Fix-MD 310ml
• 5m Waterproof tape
• 2 x Waterproof Internal Corners
• Tile Guide
• Paint Brush
• Protective Gloves
• Notched Trowel
• Installation Instructions Click Here

For larger Areas Add the Extention Kit

The shower tray is 30mm high and is typically recessed into timber floors. The drain must be able to sit between the joists or in a channel on a screeded floor. The waterproof boards are 10mm high.

Constructed from a high quality structural hard foam, the Level Access Wet Room Shower Floor is humidity resistant and has a special mortar coating with a glassfibre reinforcement. It is light, strong and an ideal substrate to tile on to.

NB: We recommend the use of 10mm Elements board on the rest of the floor prior to tiling. This is for waterproofing stability of tiles and insulation.