Wedi Subliner Dry and Flex 15 x 1m

Wedi have designed this Subliner as a quicker alternative rather than installing Wedi building boards. The Wedi Subliner covers any joints and cracks in surfaces. 

The Wedi Subliner is made from a highly tear-resistant polyethylene film which increases the adhesion of tile-setting compounds. This Subliner can also be used in exterior areas.

The Wedi Subliner Dry and Flex is good to use when time is limited as it is less time consuming than installing tile backer boards. Simply put a thin layer of tile adhesive on the surface you wish to cover then cut and lay the Subliner.

Wedi Subliner Dry and Flex Specifications

• 15m Long
• 1m Wide
• 0.87mm Thick
• Seals cracks and joints
• Quick and Easy alternative to Tile Backer Boards
• Can be installed on walls or floors
• Approved sealant for wet areas under high loads
• Watertight and water vapour proof
• Must be installed to a hard, solid and even surface
• Manufactured from a highly tear-resistant polyethylene film
• -30ºC to +90ºC Temperature Resistant
• Suitable for underfloor heating
• 095110315