Scudo S8 Complete Walk In Enclosure And 1700mm Tray

This Complete walk in shower enclosure kit from Scudo comes complete with glass, trims, support bars, walk in shower tray and waste.

A Choice of tray depths are available as well as optional side panels and floor to ceiling support

Scudo Walk In Enclosure Kit Contents:

• Scudo S8 1000mm Wetroom Panel & Wall Profile
• Scudo 1700mm Shower Tray (Choice of Depths)
• Optional End Panel
• Optional Flipper Panel
• Optional Floor To Ceiling Support Post

800mm Glass Spec:

• Height 2000mm
• Width 1000mm
• 20mm adjustment in wall channel for out of true walls
• 8mm Thick Toughend Safety Glass
• Acqua Shield Glass Treatment As Standard
• Modern Minimalist Support Arm Included
• Can Be Installed Onto A Shower Tray Or Tiled Wetroom Floor
• Scudo's Lifetime Guarantee

Shower Tray Spec:

• 30mm Height
• Stone Resin Construction
• 90mm Waste
• 1700mm Width
• 700/760/800/900mm Depth

Walk In Shower Enclosure FAQs

Do I need an end panel?

If you are installing you walk in shower in a recess and wall to wall, then the end panel is not required. If you walk in enclosure is going in a corner then an end panels would be required to help contain water splash.

Do I need a T Piece?

T pieces are only required when you are selecting an end panel. This is used to join the supports bars from the main glass to the end panel in a T Shape.

Do I need a flipper panel?

Flipper panels help to contain and defelct splash back into the shower enclosure. Flipper panels are optional and its hard to say if you need one as it depending on many factors from the water pressure, the angle of the shower head, how much water splashes off your body and many more factors.

Can I have a flipper and a floor to ceiling post?

You can not have a floor to ceiling post and a flipper on the same piece of glass. You can have a flipper on your main front piece of glass and a floor to ceing post on the end panel if you wish. Doing this would mean a T piece wouldnt be required.