ProPlas Internal Corner Profile 2700mm

Price £14.00 inc. VAT

Code: PRACINCO

Profile Finish:

Qty

Add to Basket

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

ProPlas Internal Corner Profile - 2700mm

This Internal Corner trim from ProPlas is designed to fix ProPlas panels to internal corners of a run of panelling, this leaves a decorative trim on show in a corner while giving panels the support of this corner trim to help hide cut edges of the panels while being able to fully seal the panel in to the corner trim.

Each trim is 2700mm's in length and suit panel widths of 8mm, they come in a variety of colours which you can choose from the drop down menu.

White - PRACINCOLWHIT00000
Silver - PRACINCOSILV00000
Black - PRACINCOLBLAC00000

Please note these trims are set as free delivery as they should only be purchased with ProPlas panels, if you require trims only you must call in on 01642913787 as a delivery charge is applicable and will need to be added at the point of order, failure to do this will result in a delay in the fulfillment of your order.

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Length

2700

Type

Panel Accessories

Delivery Information

PLEASE NOTE: ProPlas deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. ProPlas is delivered on large high sided vehicles, please ensure easy access is available before ordering. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews