Aquadart Rolla 8 Sliding Door Enclosure - 1500mm Matt Black

This Rolla 8 Enclosure from Aquadart is a frameless shower enclosure designed to fit in any bathroom or en suite. With no frame and smooth rollers, this Aquadart Sliding Enclosure will open and close effortlessly. Finished with a clear seal, this completes the Aquadart Enclosures frameless look.

Unlike any other sliding door enclosure, the smooth rollers for this door are on the bottom of the glass to give a more modern, minimilistic look. The door for this Shower Enclosure can be installed either left hand or righ hand orientation giving you the freedom to install your Aquadart Shower Enclosure in any space.

Please choose from the 4 side panels from the drop down section to complete your Aquadart Frameless Shower Enclosure.

This Aquadart Rolla 8 Enclosure is manufactured to use with contemporary slimline trays or wetroom installation.

Do I need a corner post or closing seal?

If you are installing the Rolla8 enclosure where the enclosure is mouted to the wall, and open and closes against the glass side panel, the the corner post and closing seal are optional. If you were to however which to install the Rolla8 enclosure to the side panel to allow the door to open and close against a wall, the corner panel and closing seal are required

Installing your new shower into a recess? If that's the case, you will need the Aquadart Rolla 8 Sliding Shower Door Recess - 1500mm

Aquadart Rolla 8 Sliding Door Enclosure Spec

• 8mm Toughened Glass
• Adjustments 1465-1485mm
• Aperture 660-680mm
• 2000mm Height
• 1500mm Length
• Matt Black Profiles
• Power Shower Compatible
• Clean&Clear Glass Protection System
• Clear Seals
• Lifetime Guarantee
• Enclosure Code AQ8944-BLK
• 700mm Side Panel Adjustments: 665-685mm
• 760mm Side Panel Adjustments: 725-745mm
• 800mm Side Panel Adjustments: 765-785mm
• 900mm Side Panel Adjustments: 865-885mm