Aquadart Rolla 8 Sliding Door Enclosure - 1100mm

This Rolla 8 Enclosure from Aquadart is a frameless shower enclosure designed to fit in any bathroom or en suite. With no frame and smooth rollers, this Aquadart Sliding Enclosure will open and close effortlessly. Finished with a clear seal, this completes the Aquadart Enclosures frameless look.

Unlike any other sliding door enclosure, the smooth rollers for this door are on the bottom of the glass to give a more modern, minimalistic look. The door for this Shower Enclosure can be installed either left hand or right hand orientation giving you the freedom to install your Aquadart Shower Enclosure in any space.

Please choose from the 4 side panels from the drop-down section to complete your Aquadart Frameless Shower Enclosure.

This Aquadart Rolla 8 Enclosure is manufactured to use with contemporary slimline trays or wetroom installation.

Aquadart Rolla 8 Sliding Door Enclosure Spec

• 8mm Toughened Glass
• Adjustments 1065-1085mm
• Aperture 460-480mm
• 2000mm Height
• 1100mm Length
• Power Shower Compatible
• Clean&Clear Glass Protection System
• Clear Seals
• Lifetime Guarantee
• Enclosure Code AQ8941S
• 700mm Side Panel Adjustments: 665-685mm
• 760mm Side Panel Adjustments: 725-745mm
• 800mm Side Panel Adjustments: 765-785mm
• 900mm Side Panel Adjustments: 865-885mm

Do I need a corner post or closing seal?

If you are installing the Rolla8 enclosure where the enclosure is mouted to the wall, and open and closes against the glass side panel, the the corner post and closing seal are optional. If you were to however which to install the Rolla8 enclosure to the side panel to allow the door to open and close against a wall, the corner panel and closing seal are required

Installing into a recess?

If you are installing your shower door into a recessed enclosure, you will need the Aquadart Rolla 8 Sliding Shower Door Recess 1000mm