Perform Panel Internal Corner Profile

Price £14.50 inc. VAT

Code: Perform Internal Corner

Profile Finish:

Qty

Add to Basket

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

Perform Panel Internal Corner Extrusion Profile - 2500mm

This fixing bracket from Perform Panel is designed to fix Perform Panel boards flush into corners, this sits flush against the corner of the wall surface and the panels slot in to each side at 90° angle, the Perform panel wet wall boards are held in place with adhesive leaving a good looking finish.

90 Deg Internal Corner Trim 2500mm
Used to mount panels at right angles to each other. Seal with Perform Panel sealant.

Perform Panel Trims available in:

Bright Silver
Satin Silver
Gloss White
Gloss Black

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Type

Panel Accessories

Delivery Information

PLEASE NOTE: Perform Panel deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews