Multipanel Floor To Wall Profile Type 103

Our Price £30.00 inc. VAT

Price £50.00 inc. VAT

Code: MPWFWH

You Save £20.00 40%

Qty

Add to Basket

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

Multipanel Floor To Wall Profile Type 103

Multipanels Floor To Wall Profile gives a neat and accurate finish to vinyl floor and wall fittings.

Easy to cut and fit, this trim allows the vinyl flooring to be changed without having to replace any of the panels. The ridge spacer provides the perfect gap for silicone sealant and the vinyl flooring can be fixed securely under the flap at the base of the trim. Profiles are supplied in 2450mm.

The multipanel Floor To Wall PVC profile is 2.45m long and available only in White.

Type 103 Profile Specs:

Colour: White
Length: 2450mm
Manufacturer Guarantee: 1 Year

Other Profiles Available:

Type A - Internal Corner
Type B - External Corner
Type C - L Shaped End Cap
Type D - Mid Joint
Type E - Quadrant End Cap
Type X - Base Profile
Type 100 - Flush Corner

Please note: All 3D drawings are a generic representation of the profile type. Dimensions specific to each range are shown on the line drawings.

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Construction

PVC

Thickness

Length

2450

Type

Panel Accessories

Delivery Information

PLEASE NOTE: Multipanel deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews