Plumbwall 4 Silver Shimmer Bathroom Wall Panels - 2400 x 1200 x 4mm

Our Price £129.00 inc. VAT

Price £258.00 inc. VAT

Code: 4010050055

You Save £129.00 50%

Qty

Add to Basket

Plumbwall 4 Silver Shimmer Bathroom Wall Panels - 2400 x 1200 x 4mm

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

Silver Shimmer Solid PVC Kitchen or Bathroom Wall Panelling

PlumbWall4 Bathrom Wall Panelling is a new way of acheiving those bright glossy walls you see in hotels at home for a fraction of the cost. PlumbWall4 Wall Boards have entered the UK market to compete against other wall panelling manufacturers at nearly half the cost.

PlumbWall4 Panels are one of the only panels in the UK to be solid PVC and 100% water resistant. Each panel is 2400 x 1200 giving a coverage on 2.88m2 per panel perfect for fast installation inside a shower or round a bath. PlumbWall 4 is perfect for installing directly over tiles. Being 4mm thick, Plumbwall 4, will add minimal tickness to your wall meaning exsisiting shower enclosure can re reinstalled on top.

We recommend using the metal trims to help with the sealing of your installation, however, with this panels being 100% water resistant to the core you could just use a coloured silicone to give you a seemless finish.

Silver Shimmer PlumbWall4 Specification

Height: 2400mm
Width: 1200mm
Thickness: 4mm
Weight per sheet: 26KG
Solid PVC Panel
100% Water Resistant
Finish: Gloss
Colour: Silver Shimmer

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Colour

Grey

Type

Wall Panel

Edge

Square Edge

Panel Range

Silver Shimmer

Manufacturers Guarantee

5 Years

Finish

Gloss

Width

1200

Delivery Information

PLEASE NOTE: PlumbWall4 deliveries are fulfilled direct by the distributor and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews