Mira Vigour Power Shower - Manual

Mira Vigour Power Shower is the perfect way to add power to your shower when you have a low pressure plumbing system like a stored water gravity system. With its built in pump, the Mira Vigour Power Shower will give you the shower experence you have always hoped for.

Mira Vigour Power Shower is suitable for low pressure systems only. Maximum temperature stop for increased safety. Separate temperature and flow controls. Delivers 12 litres of water a minute. 4 spray showerhead with rub-clean nozzles for easy limescale removal.

Temperature Control
Control type: Manual
Phased shutdown
Factory set to safe max temperature

Installation Information
Water & Cable entry points: Left (rising, falling & rear)
Inlet connection: 15mm dual entry push fit
Outlet connections: 1/2" BSP male
Supply Voltage: 230v + 10%
Supply rating: 3 amp
Terminal block connections: Maximum 2.5mm²
Cistern: Minimum 230 litres

Supply Conditions (hot and cold)
Cold water range: Up to 25°C
Hot water range: 55°C-65°C
Minimum maintained pressure: 0.008 bar (80mm head)
Maximum maintained pressure: 0.5 bar (5 meter head)
Maximum static pressure: 1.0 bar (10 metre head)

Shower Performance
Flow rate: Up to 12 litres per minute
Temperature stability: + 6°C
5 spray 9 cm showerhead with rub clean nozzles

Easy to fit & Maintain
No need to prime
Removable filters
Removable check valves

Benefits for your customer
Separate temperature and flow controls
Four spray showerhead